Item Description

          SWC-DH Brief Telescopic Welding Cardan Shaft(JB/T5513-ninety one) 

♦Description
SWC-DH variety cross shaft universal coupling is 1 of the most commonly utilized couplings. The qualities of the composition can not be in the exact same axis or axis angle or more substantial axial movement of 2 massive equiangular ongoing rotary speeds and reliably transfer torque and motion. Can be widely utilized in metallurgy, lifting, transportation, mining, petroleum, shipbuilding, coal, rubber, paper equipment, and other heavy equipment sector machinery shaft in the transmission torque.

The main attributes of SWC-DH kind cross shaft universal coupling:
one. has a massive angle payment ability.
two. compact and reasonable composition. The SWC-DH type employs the integral forkhead, which causes the car to have a lot more reliable.
3 .carrying capacity.
four. high transmission performance. Its transmission effectiveness is up to 98-ninety nine.8% is used for big energy transmission, power-saving effect is apparent.
5 .carry a smooth, reduced sound, straightforward to install and maintain.
Simple Parameter and Major Dimension(JB/T5513-ninety one)

Model D Tn /N.m Tf
kN.m
β Ls Lmin D1
(js11)
D2
(H7)
D3 Lm n-d K t b
(h9)
g I kg·m2 G kg
Lmin 100mm LModmin 100mm
SWC180DH1 180 20 10 ≤25 75 650 155 105 114 110 8-seventeen 17 5 24 7 .165 0.0070 fifty eight 2.eight
SWC180DH2 fifty five 600 .162 56
SWC180DH3 40 550 .one hundred sixty fifty two
SWC200DH1 200 32 16 ≤15 80 720 170 120 127 135 8-seventeen 19 5 28 16 .276 0.0130 seventy six 3.6
SWC200DH2 fifty 690 .261 seventy four
SWC225DH1 225 40 20 ≤15 eighty five 710 196 135 152 120 8-17 20 5 32 9. .415 0.5714 95 4.9
SWC225DH2 70 640 .397 92
SWC250DH1 250 63 31.five ≤15 100 795 218 150 168 140 8-19 25 6 40 12.five .900 0.5717 148 5.three
SWC250DH2 70 735 .885 136
SWC285DH1 285 90 45 ≤15 a hundred and twenty 950 245 170 194 160 8-21 27 7 40 15. 1.876 0.571 229 6.three
SWC285DH2 eighty 880 1.801 221
SWC315DH1 315 125 63 ≤15 one hundred thirty 1070 280 185 219 180 10-23 32 8 40 15. 3.331 0.571 346 8.
SWC315DH2 ninety 980 3.163 334
SWC350DH1 350 180 90 ≤15 140 1170 310 210 267 194 10-23 35 8 50 16. six.215 0..2219 508 15.
SWC350DH2 90 1070 five.824 485
SWC390DH1 390 250 125 ≤15 one hundred fifty 1300 345 235 267 215 10-25 40 8 70 18. eleven.a hundred twenty five 0.2219 655 15.
SWC390DH2 90 1200 ten.763 600                              

Products Photograph

♦Other Products Record

Transmission Machinery 
Parts Title
Product
Universal Coupling WS, WSD, WSP
Cardan Shaft SWC, SWP, SWZ
Tooth Coupling CL, CLZ, GCLD, GIICL
GICL, NGCL, GGCL, GCLK
Disc Coupling JMI, JMIJ, JMII, JMIIJ
High Flexible Coupling LM
Chain Coupling GL
Jaw Coupling LT
Grid Coupling JS

♦Our Company
HangZhou CZPT Machinery Manufacturing Co., Ltd. is a engineering-based mostly business specializing in the design and style and manufacture of standard transmission parts and different auxiliary non-regular tools accessories. The goods are mainly utilized in metallurgy, electrical electricity, mining, chemical business, petroleum, papermaking, shipbuilding, hefty industry, etc.

In a lot of industries, it has offered strong technical and tools assist for several firms close to the planet. At existing, the products are also exported to Russia, Italy, Spain, Brazil, Ukraine, Turkey, Australia, Singapore, Vietnam, Indonesia, Malaysia, Sri Lanka, and other nations around the world and regions.

Welcome to customise merchandise from our manufacturing unit and make sure you give your design drawings or get in touch with us if you need other demands.

♦Our Services
1. Style Solutions
Our design team has knowledge in Cardan shafts relating to solution layout and advancement. If you have any needs for your new product or wish to make additional enhancements, we are here to offer our support.

two. Solution Services
raw materials → Cutting → Forging →Rough machining →Shot blasting →Heat treatment →Testing →Fashioning →Cleaning→ Assembly→Packing→Shipping

three. Samples Method
We could build the sample according to your necessity and amend the sample continuously to fulfill your require.

4. Investigation & Development
We generally study the new needs of the market place and develop the new product when there is new automobiles in the industry.

5. Quality Management
Every single action should be a particular check by Expert Staff according to the normal of ISO9001 and TS16949.

FAQ
Q 1: Are you a trading organization or a producer?
A: We are a professional company specializing in manufacturing
different sequence of couplings.

Q 2:Can you do OEM?
Yes, we can. We can do OEM & ODM for all the buyers with personalized artworks in PDF or AI structure.

Q 3:How long is your supply time?
Typically, it is 20-thirty times if the merchandise are not in stock. It is in accordance to quantity.

Q 4: Do you offer samples? Is it totally free or additional?
Yes, we could offer you the sample but not for free. Truly, we have a extremely great price tag principle, when you make the bulk purchase the expense of the sample will be deducted.

Q 5: How prolonged is your warranty?
A: Our Guarantee is 12 months beneath typical situations.

Q 6: What is the MOQ?
A: Usually our MOQ is 1pcs.

Q 7: Do you have inspection techniques for coupling?
A:a hundred% self-inspection just before packing.

Q 8: Can I have a check out to your manufacturing facility prior to the get?
A: Certain, welcome to visit our factory.

Q 9: What’s your payment?
A: T/T.

Speak to Us
Add: No.eleven HangZhou Highway,Chengnan park,HangZhou Town,ZheJiang Province,China

US $50-10,000
/ Piece
|
1 Piece

(Min. Order)

###

Standard Or Nonstandard: Standard
Shaft Hole: as Your Requirement
Torque: as Your Requirement
Bore Diameter: as Your Requirement
Speed: as Your Requirement
Structure: Flexible

###

Samples:
US$ 500/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model D Tn /N.m Tf
kN.m
β Ls Lmin D1
(js11)
D2
(H7)
D3 Lm n-d K t b
(h9)
g I kg·m2 G kg
Lmin 100mm LModmin 100mm
SWC180DH1 180 20 10 ≤25 75 650 155 105 114 110 8-17 17 5 24 7 0.165 0.0070 58 2.8
SWC180DH2 55 600 0.162 56
SWC180DH3 40 550 0.160 52
SWC200DH1 200 32 16 ≤15 80 720 170 120 127 135 8-17 19 5 28 16 0.276 0.0130 76 3.6
SWC200DH2 50 690 0.261 74
SWC225DH1 225 40 20 ≤15 85 710 196 135 152 120 8-17 20 5 32 9.0 0.415 0.0234 95 4.9
SWC225DH2 70 640 0.397 92
SWC250DH1 250 63 31.5 ≤15 100 795 218 150 168 140 8-19 25 6 40 12.5 0.900 0.0277 148 5.3
SWC250DH2 70 735 0.885 136
SWC285DH1 285 90 45 ≤15 120 950 245 170 194 160 8-21 27 7 40 15.0 1.876 0.0510 229 6.3
SWC285DH2 80 880 1.801 221
SWC315DH1 315 125 63 ≤15 130 1070 280 185 219 180 10-23 32 8 40 15.0 3.331 0.0795 346 8.
SWC315DH2 90 980 3.163 334
SWC350DH1 350 180 90 ≤15 140 1170 310 210 267 194 10-23 35 8 50 16.0 6.215 0..2219 508 15.0
SWC350DH2 90 1070 5.824 485
SWC390DH1 390 250 125 ≤15 150 1300 345 235 267 215 10-25 40 8 70 18.0 11.125 0.2219 655 15.0
SWC390DH2 90 1200 10.763 600                              

###

Transmission Machinery 
Parts Name
Model
Universal Coupling WS, WSD, WSP
Cardan Shaft SWC, SWP, SWZ
Tooth Coupling CL, CLZ, GCLD, GIICL
GICL, NGCL, GGCL, GCLK
Disc Coupling JMI, JMIJ, JMII, JMIIJ
High Flexible Coupling LM
Chain Coupling GL
Jaw Coupling LT
Grid Coupling JS
US $50-10,000
/ Piece
|
1 Piece

(Min. Order)

###

Standard Or Nonstandard: Standard
Shaft Hole: as Your Requirement
Torque: as Your Requirement
Bore Diameter: as Your Requirement
Speed: as Your Requirement
Structure: Flexible

###

Samples:
US$ 500/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model D Tn /N.m Tf
kN.m
β Ls Lmin D1
(js11)
D2
(H7)
D3 Lm n-d K t b
(h9)
g I kg·m2 G kg
Lmin 100mm LModmin 100mm
SWC180DH1 180 20 10 ≤25 75 650 155 105 114 110 8-17 17 5 24 7 0.165 0.0070 58 2.8
SWC180DH2 55 600 0.162 56
SWC180DH3 40 550 0.160 52
SWC200DH1 200 32 16 ≤15 80 720 170 120 127 135 8-17 19 5 28 16 0.276 0.0130 76 3.6
SWC200DH2 50 690 0.261 74
SWC225DH1 225 40 20 ≤15 85 710 196 135 152 120 8-17 20 5 32 9.0 0.415 0.0234 95 4.9
SWC225DH2 70 640 0.397 92
SWC250DH1 250 63 31.5 ≤15 100 795 218 150 168 140 8-19 25 6 40 12.5 0.900 0.0277 148 5.3
SWC250DH2 70 735 0.885 136
SWC285DH1 285 90 45 ≤15 120 950 245 170 194 160 8-21 27 7 40 15.0 1.876 0.0510 229 6.3
SWC285DH2 80 880 1.801 221
SWC315DH1 315 125 63 ≤15 130 1070 280 185 219 180 10-23 32 8 40 15.0 3.331 0.0795 346 8.
SWC315DH2 90 980 3.163 334
SWC350DH1 350 180 90 ≤15 140 1170 310 210 267 194 10-23 35 8 50 16.0 6.215 0..2219 508 15.0
SWC350DH2 90 1070 5.824 485
SWC390DH1 390 250 125 ≤15 150 1300 345 235 267 215 10-25 40 8 70 18.0 11.125 0.2219 655 15.0
SWC390DH2 90 1200 10.763 600                              

###

Transmission Machinery 
Parts Name
Model
Universal Coupling WS, WSD, WSP
Cardan Shaft SWC, SWP, SWZ
Tooth Coupling CL, CLZ, GCLD, GIICL
GICL, NGCL, GGCL, GCLK
Disc Coupling JMI, JMIJ, JMII, JMIIJ
High Flexible Coupling LM
Chain Coupling GL
Jaw Coupling LT
Grid Coupling JS

The Different Parts of a PTO Shaft

Power Take-Off (PTO) shafts are an integral part of a tractor’s driveline. Without them, a tractor cannot operate. It is essential to understand the different parts of a PTO shaft, as they are crucial for the operation of your tractor. These parts are typically overlooked during routine tractor maintenance checks, but knowing more about them will help you practice on farm machinery better.

Tractor’s power take-off (PTO) shaft

Shaft CollarA Tractor’s power take-off (or PTO) shaft transfers power from the tractor to an implement. These shafts typically rotate at speeds between 540 and 1000 rpm. A number of safety features help prevent accidental contact between the shaft and the implement.
In order to avoid this problem, tractor operators should be vigilant while operating their tractors. They should make sure that the tractor’s power take-off (PTO) shaft is shielded. These shields include a master shield for the PTO stub, a PTO integral journal shield, and an implement input connection shield. The PTO master shield is mounted on the tractor and extends over the PTO stub on three sides. It is designed to prevent collisions between the tractor and any connected machine drive shaft.
A power take-off (PTO) shaft is an important component on any tractor. It is a shaft that transmits mechanical power from a tractor to an implement or separate machine. Early PTOs used a transmission and were located at the rear of the tractor. They are now available with hydraulic or mechanical drivelines. These power take-offs transfer the tractor’s power to a secondary piece of equipment through a driveshaft.
Proper PTO shaft guards protect people from stepping on rotating shafts. The PTO should not compress fully at any point in the operating range. It should have several inches of overlap at the maximum operating extension. A PTO guard should be positioned properly for each machine.
Despite these benefits, there are still many risks associated with PTO shafts. These powerful and potentially dangerous pieces of machinery can cause severe injury if not used safely. Luckily, proper installation of safety shields can reduce the risk of injury.

Types

PTO shafts come in a variety of different shapes, sizes, and materials. The most common types are square and round, but there are also star-shaped and trilobed types. While the star-shaped type is a typical North American design, the trilobed and lemon-shaped varieties are typically German or Italian. Typically, the lemon-shaped ones are made of an alloy called ‘Lemon Yellow.’ In some cases, the shaft will come with snap rings.
Different manufacturers use various materials for their PTO shafts. The tube of a welded drive shaft must be strong enough to handle the force exerted by the PTO. There are many different materials available, but some are stronger than others. Before choosing the type of drive shaft that is right for your machine, make sure that you know the exact measurements of your driveline.
When deciding between different types of PTO shafts, you must also consider the materials that will be used for your particular application. While splines are the most common material for PTO shafts, you can find various types that have different uses. Carbon steel is malleable and has a low carbon content, which makes it more reliable. A ferrous steel is more durable and contains metals like nickel, chromium, and molybdenum, which make it a great alternative to carbon steel.
A PTO gearbox input shaft extends between the PTO gearbox and the PTO clutch. It is mounted with a toothed wheel 8. An inductive sensor 9 on the shaft outputs a pulsed electronic signal based on the rotational speed of the shaft. These pulsed signals are called inductive speed sensors.

Rotation direction

The PTO shaft is a critical part of the power take-off of a farm tractor. It allows the tractor to transfer power from the engine to an implement such as a mower or other garden equipment. The rotation direction of the PTO shaft depends on the type of implement. Some implements only accept rotation in one direction, while others require rotation in both directions.

Safety chain

Shaft CollarOne of the best ways to protect your PTO shaft is to use a safety chain. A safety chain is a chain that is attached to the PTO shaft, and it prevents the plastic shield from spinning on the shaft. This chain should be fastened to a suitable point on your machine or tractor. It should not be attached to the lower lift arms or the U-guard.
PTO shafts can be very dangerous if they are not guarded. They can rotate as high as 1000 rpm and could seriously injure you. It is also important to ensure that the PTO shaft guard is fitted correctly, and that the tractor is turned off before working on it. In addition, avoiding wearing loose clothing when working around a PTO shaft can help protect your life.
Another way to protect the PTO shaft is to shield the IID shaft. This can be done by using shielding over the straight part of the shaft, the PTO connection, or the Implement Input Connection. A protruding bolt or pin can catch clothing and snag it. If not shielded, the clothing can wrap around the shaft, trapping the person against it.
A good safety chain should be positioned between the tractor and the PTO shaft. The chain should be at least 50 mm wider than the PTO shaft, and should be in good condition. It should cover the entire length of the PTO shaft from the tractor to the first bearing. The PTO shaft must also be fitted with the correct bearing ring. It is also vital to ensure that the PTO guard does not bend or break, as this could result in damage to the PTO shaft.

Shield

Shaft CollarA PTO shaft shield protects the PTO shaft from possible impacts. It is typically made of plastic, but can also be made of metal. These shields are easy to damage, and are therefore preferably made of a durable material. The shields are held in place with brackets. The shields are made with two parts: an inner shield and a protective sleeve.
An improvement to the PTO shaft shield is a bracket that supports both the outer and PTO shaft. It is shown in conjunction with a towed machine in FIGS. 2 and 7. FIG. 7 is a side elevation of the bracket mounted to the tongue of the machine. This shield is designed to prevent the PTO shaft from becoming damaged during the towed process.
The main risk associated with PTO mishaps is entanglement, which can result in serious injuries. If a shaft separates from a tractor, it can strike nearby workers or people. Proper maintenance can minimize the risk of entanglement and save lives. Thankfully, equipment manufacturers have made huge strides in reducing the risk of these accidents. Operators should always make sure that the PTO shaft shield is in place to avoid the risk of entanglement.
In addition to preventing entanglement, a PTO shaft shield also helps protect the universal joints that are mounted on the PTO shaft. The shield is made of plastic or steel. It is typically shaped like an inverted U and covers both the top and sides of the shaft. A detachable PTO shaft shield is also available.
As with all parts of a PTO driveline, the PTO shaft shield should be maintained to prevent damage to the bearings. It is necessary to inspect the shield and replace it whenever it becomes damaged. PTO equipment is often used outdoors, and it is frequently exposed to crop debris, rust, and dirt that can affect the bearings. Proper maintenance will extend the equipment’s lifespan and reduce maintenance costs.
 auger pto shaft auger pto shaft
editor by czh 2023-02-01